Thread Rolling Dies for Chipboard Screws — CB-B Type
GXP Click here
GXP supplies CB-B type flat thread rolling dies. Each matched set consists of one stationary die and one moving die. Custom specifications can be reviewed according to detailed screw drawings and machine requirements.For chipboard screw applications, specify the required CB-B thread profile, threaded length and point geometry on the drawing.
Definition and Functions
CB-B type thread rolling dies are forming tools used to create the specified external thread profile on screw blanks. Pressure between the die plates displaces the blank material to form the threads.
Main functions:
- Form the required thread pitch, profile and diameter.
- Control threaded length and thread runout.
- Match tooling dimensions to the specified rolling machine.
- Support repeatable production with consistent blanks and correct machine settings.
The website does not define the CB-B thread geometry. Confirm the thread angle, root and crest profiles, and point design against an approved drawing before ordering.
Die Materials
The GXP product page lists the following material options.
| Material | Material Type |
|---|---|
| SKD-11 | Cold-work tool steel for carbon steel used |
| DC-53 | Cold-work tool steel for carbon steel used |
| SKH-9 | High-speed tool steel for stainless steel used |
| M2 | High-speed tool steel for stainless steel used |
Material selection should consider screw blank material, hardness, thread geometry and production conditions. Confirm the exact grade, heat treatment and any surface treatment during quotation.
Ordering Information
Please provide the following details for technical review and quotation:
| Item | Required Information |
|---|---|
| Screw dimensions | Major diameter, overall length, head style and head dimensions |
| CB-B thread profile | Pitch, included thread angle, root diameter, crest profile and tolerances |
| Threaded length | Full or partial thread, unthreaded shank length and runout |
| Point and special features | Point dimensions, cutting notches, serrations or other requirements |
| Blank specifications | Material grade, hardness before rolling, blank diameter and length |
| Machine details | Machine manufacturer and model |
| Die dimensions | Length, height and thickness of both dies, including mounting details |
| Purchase requirements | Drawing revision, quantity in matched sets, inspection requirements and requested delivery date |
FAQ
1. What are CB-B type thread rolling dies used for?
They form external screw threads according to the specified CB-B profile and approved screw drawing.
2. Is CB-B the same as the standard CB design?
Interchangeability must be confirmed. The website lists CB and CB-B separately but does not explain their geometric differences.
3. Should the thread angle be 40°?
Confirm it on the drawing. The CB-B product page does not specify a thread angle, so a 40° profile should not be assumed.
4. Which materials are available?
GXP lists SKD-11, DC-53, SKH-9 and M2. Each set includes one stationary die and one moving die.
5. Can full-thread and partial-thread designs be reviewed?
Yes. Provide the threaded length, unthreaded shank dimensions and runout requirements for tooling review.
6. Can the dies form points or cutting notches?
These features require a feasibility review based on the starting blank, finished screw geometry and machine capability.
7. What should be checked during trial production?
Inspect thread diameter, pitch, angle, profile, threaded length and point geometry. Check for incomplete threads, laps and surface damage. Where required, verify installation performance in the specified board material.
Request a Quotation
Send GXP your CB-B chipboard screw drawing, blank specifications, machine model and die dimensions for technical review and quotation.




